Buy Mikrotik 1G & 10G Mikrotik Modules best Price
Buy Mikrotik 1G & 10G Mikrotik Modules from Mikrotik products authorized dealer in Nairobi Kenya, buy online and have the compatible Mikrotik modules online and have them delivered to your preferred destination.
Mikrotik 1G & 10G Mikrotik Modules are compatible with Mikrotik routers, Ubiquiti Router, TP-link Routers, Cisco Routers and D-link Routers.
MikroTik (ACRPSMA) Flex-guide Spare Patch Cable | RP-SMA to RP-SMA
KSh2,500.00 + VAT
MikroTik +85DLC03D Multi Mode 300M SFP+ Module
KSh9,000.00 + VAT
MikroTik GPEN11 Wall-Mount Gigabit Network Power Injector
KSh1,300.00 + VAT
- The GPEN11 is a power injector that can be mounted on a wall, and will power your uplink devices with PoE power
- The GPEN11 is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy ethernet alternative
- GPEN11 can be mounted inside customer premises, next to the WiFi router which provides the connectivity to the users
- The GPEN11 itself will then power the ISP router, whether a outdoor wireless unit mounted on a roof, or the network switch
- The GPEN unit can be securely attached to a wall, or communications cabinet. The ethernet cable can be routed either directly through it’s bottom cable opening, or into the wall, as preferred
MikroTik LHG Wall Mount Adapter
KSh1,750.00 + VAT
MikroTik Q+85MP01D 40Gbps 850nm Optical Module
KSh8,000.00 + VAT
MikroTik RBGPOE Gigabit PoE Injector
KSh1,000.00 + VAT
MikroTik RBPOE 10/100Mbps PoE Injector
KSh750.00 + VAT
- It has passive PoE base unit for powering passive PoE devices over ethernet
- Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the Router BOARD device
- Helps reducing number of wires that lead up the tower, and in other situations
- For using with Router BOARDS that support 10-28V PoE powering, input needs to be at least 18V to any losses in cables
MikroTik S-4554LC80D SFP 1.25G Module
KSh12,500.00 + VAT
Mikrotik S-85DLC05D 1.25G SFP transceiver Module
KSh5,000.00 + VAT
MikroTik S-RJ01 RJ45 SFP 10/100/1000M Copper Module
KSh4,000.00 + VAT
- Up to 1.25 Gb/s bi-directional data links; 100m transmission over unshielded
- Compliant with IEEE Std 802.3TM-2002; Compliant with SFP MSA, RoHSCompliance
- Access to physical layer IC via 2-wire serial bus; RJ-45 connector
- Hot Pluggable SFP footprint; +3.3V single power supply; Extended case temperature range (0°C to +85°C)
Mikrotik S+85DLC03D 10G SFP+ Transceiver
KSh9,000.00 + VAT
- S+85DLC03D is a 10G SFP+ transceiver with a LC connector, 850nm, for up to 300 meter Multi Mode fiber connections
- SFP+ module 10G MM 300m 850nm LC-connector DDMI
- Data Rate 10G Format SFP+
- Distance 300m / Mode MM Connector LC
- Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well.
MikroTik S+DA0001 1M SFP+ Direct Attach Cable
KSh4,000.00 + VAT
- Mikrotik S+DA0001
- It's a cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.
- Low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.
- SFP+ direct attach cable
MikroTik SFP 1.25G 20KM Single Mode Module
KSh6,000.00 + VAT
- S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector
- Up to 20 kilometer Single Mode fiber connections, with DDM
- Connector: Dual LC UPC
- Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
- S-31DLC20D is compatible with non-MikroTik SFP devices as well
MikroTik SFP+ 3M Direct Attach Cable
KSh5,000.00 + VAT
- This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.
- They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards.
- They are direct attached compliant and fully conform to the SFP+ MSA specifications.
- SFP+ 3m direct attach cable
- 10-Gigabit Ethernet Fiber Channel
Mikrotik U.fl to SMA Female Pigtail for wAP R (ACSMAUFL)
KSh1,750.00 + VAT
MikroTik’s GPeR Gigabit Ethernet Repeater
KSh3,300.00 + VAT
